Rotary shaft seals

 
rotary shaft seals

ROTOLIP®
Rotary lip seals for rotating shaft. Integrated body and sealing lip in Neuflon-ptfe compound. Available with or without auxiliary O-Ring.
An inox support ring can be implemented according with the working conditions, it is supplied as standard when the shaft exeeds 100 mm.

Food, pharma and chemical applications.
Wide range of chemical resistance.
Suitable for lubricated or dry running conditions.

spring energized seals Rotoenerseal
spring energized rotary seal
single acting
medium pressure
moderate speed

Criogenic applications
Food and pharma applications
Optional FDA approved silicone filling
Wide range of chemical resistance

slipper composite seals Rotoslipper
double acting composite rotary seal
high pressure
low speed

High pressure rotary seals.
Slow rotating movements, fast translational movements, combined roto-translational movements.
Max Pressure 800 bar.
Temperature range   -60 a + 150°C

 slipper composite seals Rotowiper
single acting composite rotary seal
low pressure
low speed

Closed groove
Very low torque
Protected wiping lip
Wide chemical resistance range

 

 

rotary shaft seals

ROTOLIP®
Rotary lip seals for rotating shaft. Integrated body and sealing lip in Neuflon-ptfe compound. Available with or without auxiliary O-Ring.
The inox support ring can be implemented according with the working conditions, it is supplied as standard when the shaft exeeds 100 mm.

rotary shaft seals

 

rotary shaft seals

Rotolip® standard
Monodirectional rotary seal.
FDA applications
Available for any shaft from 6 to 350 mm

Operating conditions:
Temperature:  -60  +250 °C
Speed: max 10m/sec if dry, up to 25m/sec with lubrication
Pressure: max 4 bar ( up to 10 bar with backup )
Versions R01 and R011 without support ring: shaft 100mm max.
Runout max  0,15mm

 

rotary shaft seals

Rotolip® reinforced lip
Monodirectional rotary seal.
FDA applications.
Available for any shaft from 6 to 350 mm

Operating conditions:
Temperature:  -60  +250 °C
Speed: max 5m/sec if dry, up to 15m/sec with lubrication
Pressure: max. 4 bar ( up to 10 bar with backup )
Versions R05 and R055 without support ring: shaft 100mm max.
Runout max 0,15mm

 

rotary shaft seals

Rotolip® garter
Monodirectional rotary seal.
FDA applications
Available for any shaft from 6 to 350 mm

Operating conditions:
Temperature:  -60  +250 °C
Speed: max 5m/sec if dry, up to 10 m/sec with lubrication
Pressure:  max. 4 bar ( up to 10 bar with backup )
Versions R07 e R077 without support ring: shaft 100mm max.
Runout 0,30 mm max.

 

rotary shaft seals

Rotolip® double lip
Monodirectional rotary seal.
Allows creating a reserve of lubricant between the sealing lips.
Available for any shaft from 20 to 350 mm

Operating conditions:
Temperature:  -60 a +250 °C
Speed:  max. 5 m/sec if dry, up to 15m/sec with lubrication
Pressure max. 4 bar
Runout 0,15mm max.

 

rotary shaft seals

 

Rotolip® with opposite lips
Bidirectional rotary seal.
Available for any shaft from 20 to 350 mm

Operating conditions:
Temperature:  -60 a +250°C
Speed: max. 5 m/sec if dry, up to 15 m/sec with lubrication
Pressure max. 2 bar

Dimensions on request

The technical-application data specified in catalogues, documentation and on this website are the result of more than forty years of experience and laboratory tests. The seal types suggested are the result of laboratory tests and thousands of field tests; however, the working conditions foreseen may not coincide with those of new applications and so lead to unexpected results. Therefore, HD Slippers Srl shall not be held responsible for the failure of sealing components that have not been tested under the actual working conditions. For new applications and the consequent manufacturing of specific seals, the user must conduct tests under the actual working conditions in order to approve the validity of the chosen solution. HD Slippers Srl guarantees the repeatability of the characteristics of seals tested and approved, except for subsequent modifications of applications and/or equipment and/or its components and/or processes, by the customer or a third part.