Lubricants and fittings | Lubricants for Seals

 

 

  • A correct lubrication eliminates any inconvenience due to dry operational use, seasoning, the ageing of the elastomer and the sticking to countersurfaces when not in use.
  • O-Rings can be supplied pre-treated with a wide range of lubricants such as Molybdenum Disulfide, Graphite, HDxxx series of greases.
  • Contact our technical office for advise on the most suitable lubricant for your requirements

Click on the product's code to access the data sheet, registration is required

Commercial Type

Chemical nature

Temperature range

Applications

HD005P PTFE -200 +260°C Lubricant powder, particle size <=5micron, excellent thermal and chemical stability, FDA approved
HD006P PTFE -200 +260°C Lubricant powder, particle size <=10micron, excellent thermal and chemical stability, FDA approved 
HD010G Grafite -185 +450°C EP anti seizing Lubricant powder, great thermal and chemical stability
O-Rings coating
HD020M Molybdenum disulfide -185 +400°C EP anti seizing Lubricant powder
O-Rings coating
HD150W Silicone * -55 +200°C Multi-use lubricant, also allowed for alimentary use. NBR ageing protection, lubrication "for-life" of pneumatic components, high vacuum, water and "hard" water. Lubrication of plastic/plastic and plastic/metal couples
HD300WP Silicone * -40 +200°C For very low temperatures.
NBR ageing protection, lubrication "for-life" of pneumatic components, high vacuum, water and "hard" water. Lubrication of plastic/plastic and plastic/metal couples
Lubrication of structural bearings ptfe/inox (bridges, industrial refrigerators)
HD400K Syntetic Oil H1 -40 +140 °C

Synthetic Oil Calcium Soap Grease for lubricating seals and pneumatic components.
Class H1 for food industry
Compatible with PU, FKM, MVQ,NBR. Non compatible with Epdm.
Wide speed range: from very slow (no Stick-Slip) up to 1m/sec and more in adequate conditions.

HD900TF PTFE -70+120°C Compatible with all elastomers, allowed for alimentary use, high vacuum, methane valves, great chemical resistance
HD1800TF PTFE -30 +250°C Compatible with all elastomers, allowed for alimentary use, great chemical resistance
*NOTICE:Siliconical lubricants are not compatible to siliconic rubbers